Drager bump test station manual

– Prepare a Dräger test gas cylinder with l/min and a gas concentration higher than the alarm threshold to be tested. – Connect Dräger Pac and the test gas cylinder to the calibration adapter or connect the device to the Dräger Bump Test Station. – To enter the bump test mode, press the [+] 3 times within 3 seconds. Risk to health! Test gas must not be inhaled. Observe the hazard warnings of the relevant safety data sheets. – Insert the Dräger Pac / and connect the test gas cylinder to the in-let (back most) nipple on the calibration adapter or to the Dräger Bump Test Station. – To enter the bump test mode manually press the [+] 3 times within. free manual of drager pac ex 2 manual of drager pac ex to perform a manual bump test: – prepare a dräger test gas cylinder with l/min flow regulator and a gas concentration higher than the alarm threshold to be tested. – insert the dräger pac / and connect the manual of drager pac ex 2 - stolarstvi-.

Use our short video guide to bump test your Drager X-am multi gas detector. This is an important step in ensuring your gas detector is compliant and re. The Bump Test Station has no requirement of any power source and can thus be used at any location. The easy to use Bump Test Station checks whether the instrument in question is responding to a known concentration of gas. The gas provided by the Bump Test Station flows through the dust and water filter to the sensor (s) confirming correct. of the connected test gas cylinders. The maintenance station has various safety mechanisms at its disposal to prevent configurations critical to safety. For example there are limitations with regard to specific test gas concentrations or an automatic flushing process takes place at the beginning of the test in case of high measured values.

Remove the instrument from the Bump Test Station. ○. If the concentration values have now fallen under the A1 alarm thresholds, the instrument returns to the. Manuals. SPECS. LIVE. This Drager PAC - Bump Test Station is used and in excellent condition. Includes • PAC Gas Monitor. Easy to use, stand-alone and portable. With the Bump Test Station, functionality tests of gas detection and warning devices can be carried out easily and.